Enterasys ssr-glx19-02 Guía Del Usuario

You can quickly replace an interface’s VLAN with another VLAN. To do so, you either 
drag an IP VLAN to an IP interface or an IPX VLAN to an IPX interface.

To replace an interface’s VLAN by dragging a VLAN to the interface:

1.

Start Configuration Expert if you have not already done so. 

2.

Open the configuration file you want to modify and then double-click that file’s 
Routing Configuration object.

3.

Double-click the IP Routing Configuration object, then do one of the following:

–

If you are replacing the VLAN of an IP interface, double-click the IP Interface 
Configuration object and then double-click the IP interfaces bound to VLAN 
object.

Configuration Expert displays a list of IP interfaces bound to VLANs.

–

If you are replacing the VLAN of an IPX interface, double-click the IPX Interface 
Configuration object and then double-click the IPX interfaces bound to VLAN 
object.

Configuration Expert displays a list of IPX interfaces bound to VLANs.

4.

Double-click the Bridging Configuration object, double-click the VLAN Configuration 
object and then double-click the Protocol Based VLANs object.

5.

Select the VLAN that will be replacing the interface’s existing VLAN.

6.

Drag the selected interface to the appropriate interface.

You can drag only IP VLANs to IP interfaces, and you can drag only IPX 
VLANs to IPX interfaces.

Configuration Expert lets you change the ports of a VLAN. You can add ports by dragging 
them to the VLAN. You can also add and remove ports using a dialog box. Separate 
discussions on each operation follow.

You can quickly add ports to a VLAN by copying those ports from a port list located 
elsewhere in the configuration tree. To do so, take the following steps:

1.

Start Configuration Expert if you have not already done so.