Enterasys ssr-glx19-02 Guía Del Usuario

h. To add another link, select the Add More Link check box, click Next, and then 

continue repeating 

 through 

 until you add all the appropriate 

neighbors.

17. Click Finish.

To modify existing area tables:

1.

Start Configuration Expert if you have not already done so.

2.

Open the configuration file you want to modify and then double-click that file’s 
Routing Configuration object.

3.

Double-click the IP Routing Configuration object.

4.

Double-click the IP Unicast Routing object and then double-click the OSPF Area Table 
object.

5.

Double-click the area table you want to modify.

Configuration Expert lists the objects of the table you are modifying.

6.

Double-click the type of object (Networks Interfaces, and so on) you want to modify. 
Click the object you want to modify.

7.

Edit the object’s dialog box.

LSA Retransmission 
Interval

Enter the number of seconds between link-state 
advertisement retransmissions for adjacencies belonging 
to the virtual link. Specify a number equal to or greater 
than 1.

Transit Delay

Enter the estimated number of seconds required to 
transmit a link-state update over the virtual link.

Transit delay takes into account transmission and 
propagation delays and must be greater than 0. Specify a 
number equal to or greater than 1.

Hello Interval

Enter a number from 0 to 255 to specify the estimated 
number of seconds between hello packets that the router 
sends on the virtual link.

Router Dead Interval

Enter a number from 0 to 255 to specify the number of 
seconds that may occur without Hello packets being 
heard before the router’s neighbors will declare it down.