Enterasys ssr-glx19-02 Guía Del Usuario
Chapter 16: Configuring Routing Policies on the SSR
342
CoreWatch User’s Manual
10. Click OK.
Import Policies
An SSR’s import routing policies control which routes are added to the SSR’s routing
table. Import routing policies also determine the SSR’s preference of routes from one
protocol or peer over another.
table. Import routing policies also determine the SSR’s preference of routes from one
protocol or peer over another.
Configuring Import Policies
After you create import destinations and sources and IP route filters as discussed earlier
in this chapter, you can configure import routing policies by going through the following
procedure.
in this chapter, you can configure import routing policies by going through the following
procedure.
Note:
Before you attempt to configure an import policy, you must ensure that you have
previously configured at least one import source building block, as described in
previously configured at least one import source building block, as described in
.
To configure an import policy:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file’s
Routing Configuration object.
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the Routing Policy Configuration object.
6.
Double-click the Import Policies object and click the Configure New Import Policy
object.
object.
Configuration Expert opens the Import Policy wizard.
7.
Click Next.