Enterasys 6000 Guía De Referencia
MI B Ref erence
65
DESCRIPTION:Associated index into the MIB-II
ifTable
for this port.
::= { nlIfTable.1.4}
nlIfTableIndex
SYNTAX:
INTEGER
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:Index into a table used to describe additional information
for this port. See
nlIfTableOid
as the pointer to the actual
table.
::= {nlIfTable.1.5 }
nlIfTableOid
SYNTAX:
OBJECT IDENTIFIER
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:OID of the table entry that contains additional information
about this port. The OID will point to a specific table
depending on the type of port.
depending on the type of port.
::= {nlIfTable.1.6 }
nlIfConnectorType
SYNTAX:
INTEGER {none (
2
), rs232 (
3
), v25bisDial (
4
), v35 (
5
),
rs449 (
6
), rs530 (
7
), x21 (
8
), dsu/csu (
9
), t1 (
10
), e1 (
11
),
voice
(13
)
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:Physical connector type used for this port (valid for ports
1-8
[actual port numbers
0–7
] only)
.
::= { nlIfTable.1.7}
nlIfPortStatus
SYNTAX:
INTEGER (
1–13
)
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:Port state (valid for ports
1–64
[actual port numbers
0–63
]
only):
1
= Link up,
2
= Restarting,
3
= Operational,
4
= Disabled,
5
= Disconnect,
6
= Configured,
7
= Dial
ready,
8
= Quiesced,
9
= Failed,
10
= Hardware fault,
11
= Other,
12
= IPL,
13
= n/a,
14
= Remote loopback,