Marantz dv9500 Folleto

 

 

 

 

 

 

 

 

 

 

 

 

 
Introduction 
The DV9500 is Marantz’s latest universal disc player, situated 
at the top of their line. The player boasts an impressive set of 
features in both performance and convenience. At $2,099, the 
DV9500 is not cheap, but there is much to set it apart from the 
$300 universal disc players found at your local retailer. Upon 
lifting the box, I immediately noticed that the DV9500 was a 
lot more substantial than most other single-disc transports at 
18-and-three-quarters pounds. Once I opened the box and removed the player, which measured a fairly 
standard 17-and-one-sixteenth inches wide by four-and-a-half inches tall by 15-and-one-eighth inches, it 
was apparent that a lot of effort went into making sure that the chassis was solid and free of resonant 
chatter.  
 
Some of the DV9500’s numerous convenience features include the ability to read the following formats, 
DVD-Video, DVD-Audio, SACD-stereo and SACD multi-channel, DVD-R/RW, CD, CD-R/RW, SVCD, 
VCD, MP3 and JPEG discs. I think this should cover just about any five-inch disc format. While the player 
is technically called the DV9500 Progressive Scan Universal DVD Player, it is capable of outputting not 
only 480p, but also 1080i and 720p. This is a highly significant feature. The DV9500 has multiple video 
outputs, including HDCP compatible HDMI, Component Video, S-Video and Composite. On the audio 
side of things, the player can internally decode DTS (including DTS 96/24) and Dolby Digital, has 
adjustable lip synch delay, is the first single-disc player to feature Dolby Headphone, bass management and 
delay with DVD-Audio and SACD (SACD signals must be converted from DSD to utilized this feature). 
Other features include RS-232 and RC-5 connections. 

The DV9500’s performance features include a chassis that’s built upon a damped double layer bottom 
plate, which is designed to provide a stable platform for the transport mechanism and circuits. The transport 
is a new mechanism engineered to provide precise tracking. Marantz has provided a huge new feature – 
dual transformers to minimize channel-to-channel interference or cross talk. The analog audio circuits 
feature high current High Definition Audio Modules (HDAM) and a zero impedance copper grounding 
plate. The DACs are 192kHz/24-bit and true DSD processing is used for SACDs. Video performance is 
assisted by a 216MHz/14-bit video DAC and a separate 10-bit video scaler with 3:2 and 2:2 pull-down. A 
special Noise Shaped video circuit is also incorporated to help minimize video noise. 
 
In short, this is a universal disc player with a scalable HDMI output that can handle just about every format 
and is designed to do so without compromise. 
 
Set-up and Connection 
Connecting the DV9500 was fairly simple. I used Monster 
Cable’s M1000 DAV HDMI cable to connect the DV9500 to 
my Marantz VP12S4 projector. The other outputs of the 
DV9500 – 5.1 analog, via Monster Cable M550i and digital 
audio, via Monster Cable Ultra Series THX 1000 – were 

 

1