Marantz dv8400 Manual De Usuario

This easy setup is the minimum set of connec-
tions you need to start watching DVD video
discs. Both sound and picture are fed directly to
your TV using the supplied Audio/Video cables.
For other possible connections, see pages 11
and 12.

Be sure to insert each
plug fully for the best
connection. The plugs
and jacks are colour-
coded to make connec-
tion easier.

By connecting this DVD player to another
Marantz audio component using a supplied
System Control cable, you can remotely
operate the components as a single system.

• When connecting to component with a remote

sensor (such as the SR8300, SR7300), be sure
to connect the REMOTE CONTROL IN jack of
this DVD player to the REMOTE CONTROL
OUT jack of the component with the remote
sensor.

• When connecting to component which is not

equipped with a remote sensor, be sure to
connect the component to the REMOTE
CONTROL OUT jack of this DVD player.

• Connect with the remote control output jack of

a component (such as the SR8300, SR7300)
which is compatible with Marantz remote
control system. The remote control allows to
switch the power of this DVD player to “POWER
ON and Standby mode”.

 Note

Be sure to leave power switch on the Front
panel in the power mode.

• When using this DVD player independently, set

this switch to INTERNAL. When using this DVD
player in a system with a Marantz receiver
equipped with a remote sensor, set the switch
to EXTERNAL.

Before making or changing any rear panel connections,
make sure that all components are switched off and
unplugged from the wall outlet.

Connect to a composite video input
on your TV using the supplied Audio/
Video cable.

Plug into a standard AC
wall outlet.

Connect to a pair of stereo audio
inputs on your TV using the
supplied Audio/Video cable.

RS232C terminal
Control terminal for use
by custom installers.