Seiko Instruments slp120 Guía Del Usuario
Chapter 3
Changing Labels and Printer Care
3-6
Smart Label Printer Models 220 and 120
Adjusting the Position of Labels
If you find the labels are advancing at an angle, it’s easy to
realign them. Follow these steps:
realign them. Follow these steps:
1 Remove the print engine cover by grasping it on the top
and tilting it toward you.
2 Release the pressure on the label stock by moving the
platen release lever toward the back of the SLP.
3 Realign the label stock so it is straight.
4 Return the platen release lever to the locked position.
5 Make sure the labels feed through the slot.
6 Insert the tabs on the lower edge of the print engine
cover into the slots on the SLP and push the top edge for-
ward until the cover snaps into place.
ward until the cover snaps into place.
Remove the print engine cover
Release the platen lever
and rotate the platen knob
and rotate the platen knob
slp120-2.bk Page 6 Friday, March 3, 2000 12:40 PM