Lenovo a30 8191 Guía Del Usuario
4.
Remove the metal shield from the drive bay by inserting a flat-blade
screwdriver into one of the slots and gently prying it loose.
screwdriver into one of the slots and gently prying it loose.
5.
Pivot the drive-bay latch handle toward the front of the computer and then
pivot the drive-bay cage upward, as shown, until it is latched in the upright
position.
pivot the drive-bay cage upward, as shown, until it is latched in the upright
position.
6.
Make sure the drive that you are installing is set correctly as either a master or
a slave device.
a slave device.
v
If it is the first CD drive or DVD drive, set it as a master device.
v
If it is an additional hard disk drive, CD drive or DVD drive, set it as a slave
device.
device.
Refer to the documentation that comes with your drive for master/slave
jumper information.
jumper information.
38
User Guide