Thiel cs1.6 Folleto

 32 Hz–35 kHz (-3 dB)

Amplitude Response: 

33 Hz–26 kHz ±2 dB

Sensitivity: 

90 dB @ 2.8 V-1m

Impedance: 

4 ohms (2.8 ohms min.)

 100-600 watts

12.5 w x 21 d x 45 h inches

91 pounds

A revolutionary breakthrough in driver 

design that advances the sonic state-of-the art 

awaits your ears with the CS3.7. Its entirely 

original midrange driver provides exquisitely 

pure sound reproduction without a trace 

of audible resonances or cavity diffraction 

distortions. The  all-new 1-inch high-output 

tweeter and low distortion 10-inch woofer 

are combined with an advanced cabinet 

incorporating an aluminum cap and baffle, 

and curved 15-layer cabinet walls for 

extreme rigidity. The result is unprecedented 

purity, naturalness, and realistic sound.

An innovative departure from 

conventional speaker designs, the 

CS2.4 offers a new perspective in 

loudspeaker performance for both 

music and movies. The CS2.4 utilizes 

a unique, innovative mid-tweeter array 

that provides very high-quality 3-way 

performance while requiring only a 

2-way speaker’s electronic crossover 

and driver magnet systems. This design 

technique provides a much higher level 

of performance than other speakers in 

its price range. 

 33 Hz–37 kHz (-3 dB)

Amplitude Response: 

36 Hz–25 kHz ±2 dB

Sensitivity: 

87 dB @ 2.8 V-1m

Impedance: 

4 ohms (3 ohms min.)

 100-400 watts

11 w x 14 d x 41.5 h inches

70 pounds

 48 Hz–20 kHz (-3 dB)

Amplitude Response: 

52 Hz–20 kHz ±2 dB

Sensitivity: 

90 dB @ 2.8 V-1m

Impedance: 

4 ohms (3 ohms min.)

 50-300 watts

9 w x 11.5 d x 35.5 h inches

38 pounds

The look is sleek and unassuming. 

The sound is totally exhilarating. The 

CS1.6 establishes a new benchmark 

in loudspeaker performance that 

substantially reduces the entry price 

into high-end sound. The 2-way 

CS1.6 incorporates an extremely wide 

bandwidth woofer that greatly improves 

performance in a small, floor-standing 

loudspeaker, delivering a much purer and 

more open upper midrange coupled with 

a smoother high frequency performance. 
Its high 90 dB efficiency works well with 

lower power amplifiers

Driver Configuration: 

2 x 10"  woofers

Size: 11" W x 20" D x 23.5" H

Weight: 108 pounds

up to 105 dB @ 20Hz, 112 dB @ 30Hz
Amplifier Power: 1000 watts, RMS

Driver Configuration: 

2 x 15"  woofers

Size: 19" W x 25" D x 51" H

Weight: 290 pounds

up to 113dB @ 20Hz, 120dB @ 30Hz

Amplifier Power: 1000 watts, RMS

Driver Configuration: 

1  x 10"  woofers

 

Size: 11" W x 15.5" D x 20" H

Weight: 55 pounds

up to 99 dB @ 20Hz, 106 dB @ 30Hz
Amplifier Power: 500 watts, RMS

Driver Configuration: 

2 x 12"  woofers

Size: 16" W x 20.75" D x 34" H

Weight: 167 pounds

up to 109 dB @ 20Hz, 116 dB @ 30Hz
Amplifier Power: 1000 watts, RMS

THIEL’s revolutionary SmartSub

®

 Technology effectively eliminates the room interaction, main speaker integration, and 

distortion problems that traditionally plague subwoofers. THIEL’s unique, patented bass solutions deliver extraordinarily 
seamless, clean, and deep low-frequency reproduction for the most realistic home theater or music experience possible. THIEL’s 
SS1, SS2, SS3, and SS4 subwoofer systems use all-THIEL designed high output, low distortion drivers to provide 
exceptionally deep, uniform, and dynamic bass down to 10 Hz for any size room. Each is easily adjusted 
to eliminate wall interaction problems for any room placement without the use of complicated 
measurements or equipment using THIEL’s patented room correction technology. The result 
is perfectly balanced bass regardless of placement. In addition, unique sub amplifier circuitry 
eliminates compression distortion to greatly improve dynamics and tonal response. The SS2, 
SS3, and SS4 are powered by an internal 1000 watt high-efficiency switching mode amplifier, 
and 500 watts for the SS1.