U-Line ADA24R Guía Del Usuario

ADA24 

Electronic display is blank and 
interior light is off with door open.

Unit is in blackout/Sabbath mode 
(not Star K certified).

Exit blackout/Sabbath mode (not Star K certified) 
(See OPERATION).

Electronic display is blank and 
interior light is on with door open.

A display function has changed.

Touch and hold the WARMER button and touch and 
release the ON/OFF button three times, then release the 
temperature button. The display should become visible.

Electronic display shows repeating, 
randomly flashing symbols and 
partial characters.

A factory control mode has been 
inadvertently entered.

Touch and hold the warmer temperature button and 
touch and release the LIGHT button three times, then 
release the temperature button to exit the factory 
control mode. The set-point temperature should now 
be displayed.

Electronic display shows:
0, 1 to 16, or 99.

A factory control mode has been 
inadvertently entered.

Repeatedly touch the WARMER button to advance any 
number shown to 99 and touch and release the LIGHT 
button. The set-point temperature should now be 
displayed.

Electronic display shows one or 
more of the following:
E1, E2, E4, E5, E6. 

The unit is displaying an error code.

Record the error code(s) displayed and call for service.