Uniden dxai5588-2 Guía Del Usuario

www.uniden.com

You can record up to 10 minutes of conversation while you are using your phone. 
Any conversation that lasts less than 2 seconds will not be recorded.

1) During a conversation from the handset, press and hold the memo/record key. 

The unit begins recording with a confirmation tone and [

] flashes on the 

message counter.
A beep that can be heard by both parties sounds during recording.

2) To stop recording, press the 

or memo/record key. You hear a confirmation tone.

If you receive a call waiting tone while recording a conversation, press the talk/flash key to accept the 
waiting call. The recording feature continues recording the new call. The original call is put on hold.

• A recorded conversation

is treated as a typical
message and will be
added to the stored
messages.

• When recording a 

conversation, all dialing
features except for
using call waiting (see
page 22) are disabled.
Stop recording if you
need to enable any
other handset keys.

• Every state has 

different regulations
governing the recording
of conversations over
the telephone. Make
sure to check your
local, state and federal
laws before using this
product to record any
telephone conversation
in order to determine
that your use is in
compliance with such
laws or guidelines.

1) Call your telephone number.
2) During the greeting message, press 0 and enter your PIN code (See page 35).
3) The answering system announces the current time and the number of messages

stored in memory. Then you hear "To play incoming message, press zero two. 
For help, press one zero."

4) You may continue to listen to the voice prompts, or you may select a command

from the following chart:

When you are away from home, you can operate your answering system with any
touch-tone telephone.Use this function to check for recorded messages, to play or
delete messages, even record a new greeting message.