Utstar pcs1400 Guía Del Usuario
112
SAFETY
The network compliance with the above FCC requirements is dependent on: (a)
the use of digital technology by the wireless network; (b) GPS satellite signals
being able to reach the handset (such transmissions do not always work indoors,
for example) ; and (c) handset signals reaching wireless “base stations”
(atmospheric and environmental conditions may cause variations in handset
receiving signal strength).
the use of digital technology by the wireless network; (b) GPS satellite signals
being able to reach the handset (such transmissions do not always work indoors,
for example) ; and (c) handset signals reaching wireless “base stations”
(atmospheric and environmental conditions may cause variations in handset
receiving signal strength).
Also the transmission of the ALI information is subject, in part, to system
constraints within the wireless network to which the E911 signal is transmitted
and over which UT Starcom has no control.
constraints within the wireless network to which the E911 signal is transmitted
and over which UT Starcom has no control.
Finally, customers are advised that the PCS1400CE’s ALI capability is to be used
for E911 purposes only.
for E911 purposes only.
This feature allows you to place an emergency call even if your phone is in
“Phone Lock” or “Restrict” mode when you dial the preprogrammed emergency
number, 911, #911, or *911. It also operates in out-of-service areas. The phone
“Phone Lock” or “Restrict” mode when you dial the preprogrammed emergency
number, 911, #911, or *911. It also operates in out-of-service areas. The phone
maintains the emergency mode until you press
after disconnecting an
emergency call. In emergency call mode, the phone can receive an incoming call
from any available system.
from any available system.
To call “911” in “Phone Lock” or “Restrict” mode.
1.
Enter , , .
2.
Press . “911” and “Emergency” will appear on the screen.