Yamaha RX-V1065 Guía Del Usuario

If an error is detected during measurement, the 
measurement is canceled and “Error” appears on the GUI 
screen. Check the error and solve the problem. For details 
on each error message, see page 75.

Press jCursor n once, press jCursor l / h 
to select “Retry” or “Exit” and then press 
jENTER.

Retry
Performs “Auto Setup” again.

Exit
Terminates the measurement and “Auto Setup”.

y

• When “E-5:NOISY” appears, you can continue measurement. To 

continue measurement, select “Proceed”. However, we recommend that 
you solve the problem first and then perform measurement again.

If a problem occurs during measurement, “Check xx 
warning(s)” appears on the GUI screen. Check the 
warning and solve the problem. For details on each 
warning message, see page 76.

y

• Optimization will not be performed while a warning message is 

displayed. We recommend that you solve the problem and perform “Auto 
Setup” again.

Press jCursor n / k to select “Check xx 
warning(s)” and then press jENTER.
Details of the warning message are displayed. If there 
are multiple warning messages, you can display the 
next message using jCursor h.

To return to the top result display, press 
jENTER again.