Yamaha P-120 Guía Del Usuario
10
P-120/P-120S
Connections
1
DC IN 16V Jack
Make sure that the [STANDBY/ON] switch of the P-120/P-120S
is set to STANDBY.
Connect one end of the AC cable to the PA-300 AC power adap-
tor. Connect the AC adaptor’s DC cable to the DC IN 16V jack. Plug
the other end of the AC cable into an AC outlet.
the other end of the AC cable into an AC outlet.
After turning the power OFF, simply reverse the procedure to dis-
connect the power.
• Use ONLY a Yamaha PA-300 AC Power Adaptor (or other adaptor
specifically recommended by Yamaha) to power your instrument
from the AC mains. The use of other adaptors may result in irrepa-
rable damage to both the adaptor and the P-120/P-120S.
from the AC mains. The use of other adaptors may result in irrepa-
rable damage to both the adaptor and the P-120/P-120S.
• Unplug the AC Power Adaptor when not using the P-120/P-120S, or
during electrical storms.
2
[STANDBY/ON] Switch
Press the [STANDBY/ON] switch once to turn the power ON, a
second time to turn the power OFF. When the power is initially
turned ON, a voice selector LED will light.
turned ON, a voice selector LED will light.
• Even when the switch is in the “STANDBY” position, electricity is
still flowing to the instrument at the minimum level. When you are
not using the P-120/P-120S for a long time, make sure you unplug
the AC power adaptor from the wall AC outlet.
not using the P-120/P-120S for a long time, make sure you unplug
the AC power adaptor from the wall AC outlet.
HOST SELECT
1
6
7
8
9
2
3
4
5
Side panel
PA-300
q
w
e
AC cable
DC
cable
8