Yamaha P-120 Guía Del Usuario

P-120/P-120S

To select a reverb type press the [REVERB] button a few times until 

the indicator corresponding to the desired type lights (the indicators 
light in sequence each time the [REVERB] button is pressed). No 
reverb is produced when all indicators are off.

No reverb effect is selected when no REVERB indicator is lit.

This setting add a continuous reverb effect to the sound that is similar to 
the type of acoustic reverberation you would hear in a room. 

For a “bigger” reverb sound, use the HALL 1 setting. This effect simu-
lates the natural reverberation of a small-size concert hall.

For a really spacious reverb sound, use the HALL 2 setting. This effect 
simulates the natural reverberation of a large concert hall.

A simulation of the type of reverb produced in a stage environment.

Adjusting Reverb Depth......................................

Adjust the reverb depth for the selected voice by using the [–/

▼] and [+/YES▲]  buttons while holding the [REVERB] 

button. The depth range is from 0 through 20 (the current depth 
setting appears on the LED display while the [REVERB] button 
is held). A setting of “0” produces no effect, while a setting of 
“20” produces maximum reverb depth. Press the [–/NO

▼] and 

▲] buttons simultaneously while holding the [REVERB] 

button to recall the default setting for the current voice (default 
depth settings are different for each voice).

The [REVERB] button selects a number of digital reverb effects that you can 

use for extra depth and expressive power.

18