Yamaha P-120 Guía Del Usuario
24
P-120/P-120S
22
Tuning
Tuning Up .....................................................................
Z
Z
To tune up (raise pitch), hold the A-1 and B-1 keys simultaneously.
X
Press any key between C3 and B3. Each time a key in this range is
pressed the pitch is increased by approximately 0.2 Hz.
The [–/NO
pressed the pitch is increased by approximately 0.2 Hz.
The [–/NO
▼] and [+/YES▲] buttons can also be used to tune down
or up, respectively, in approximately 1 Hz increments. Press the [–/
NO
NO
▼] and [+/YES▲] buttons simultaneously to recall standard
tuning (A3 = 440 Hz).
C
Release the A-1 and B-1 keys.
Tuning Down ................................................................
Z
Z
To tune down (lower pitch), hold the A-1 and A#-1 keys simulta-
neously.
neously.
X
Press any key between C3 and B3. Each time a key in this range is
pressed the pitch is decreased by approximately 0.2 Hz.
The [–/NO
pressed the pitch is decreased by approximately 0.2 Hz.
The [–/NO
▼] and [+/YES▲] buttons can also be used to tune down
or up, respectively, in approximately 1 Hz increments. Press the [–/
NO
NO
▼] and [+/YES▲] buttons simultaneously to recall standard
tuning (A3 = 440 Hz).
C
Release the A-1 and A#-1 keys.
To Restore Standard Pitch..........................................
Z
Z
To restore the default pitch (A3 = 440 Hz), hold the A-1, A#-1 and
B-1 keys simultaneously.
B-1 keys simultaneously.
X
Press any key between C3 and B3.
(Pressing once will restore the keyboard to standard pitch, regard-
less of the amount of pitch adjustment.)
(Pressing once will restore the keyboard to standard pitch, regard-
less of the amount of pitch adjustment.)
C
Release the A-1, A#-1 and B-1 keys.
In terms of “Hertz”, the overall tuning range is from 427.0 Hz to 453.0 Hz.
The current tuning setting is shown on the LED display while the tuning is
being adjusted. Tenths of a Hertz are indicated on the LED display by the
appearance and position of one or two dots, as in the following example:
being adjusted. Tenths of a Hertz are indicated on the LED display by the
appearance and position of one or two dots, as in the following example:
• An alternative tuning method is available in the Function mode — page 31.
Tuning makes it possible to adjust the pitch of the P-120/P-120S over a 427.0
Hz … 453.0 Hz (corresponding to the A3 note’s Hz) range in approximately 0.2
Hertz intervals. Pitch control is useful for tuning the P-120/P-120S to match other
instruments or recorded music.
Hertz intervals. Pitch control is useful for tuning the P-120/P-120S to match other
instruments or recorded music.
Display
Value
440
440.0
4.40
440.2
44.0
440.4
440.
440.6
4.40.
440.8
C
3
B
3
A
-1
B
-1
A
-1
A#
-1
C
3
B
3
A
-1
B
-1
A#
-1
C
3
B
3
NOTE