Yamaha P-120 Guía Del Usuario
Using the User Song Recorder
28
P-120/P-120S
26
Changing the Initial Settings ..............................
The initial voice, tempo, time signature, reverb type, reverb
depth, effect type and effect depth settings made in step 2 of the
recording procedure are actually recorded by the P-120/P-120S.
recording procedure are actually recorded by the P-120/P-120S.
These initial settings can be changed after the recording is fin-
ished by pressing the [REC] button to engage the record ready
mode, pressing the appropriate track button, making the required
changes, and then pressing the [REC] button again to exit from
the record ready mode and register the changes.
mode, pressing the appropriate track button, making the required
changes, and then pressing the [REC] button again to exit from
the record ready mode and register the changes.
If you do this, be careful not to press the SONG [START/
STOP] button or a key on the keyboard, either of which will start
recording and erase all previous recorded data on the selected
track.
recording and erase all previous recorded data on the selected
track.
It is possible to cancel the operation even after changes have
been made: change tracks and then press the [REC] button to exit
from the record mode.
from the record mode.
Erasing a Single Track.........................................
All data can be erased from either of the recorder’s tracks by
engaging the record mode, selecting the track you want to erase,
and then pressing the SONG [START/STOP] button twice with-
out recording any data.
and then pressing the SONG [START/STOP] button twice with-
out recording any data.
To playback what you’ve recorded, first make sure that the song you
want to playback is selected by pressing the [USER 1/2/3] button to
select the song for playback. The selected song indicator will light. (A
song is not selected if none of the indicators are lit.) Next, make sure
that the green track indicators of the tracks you want to play are lit. If
not, press the corresponding track button(s) so that they are lit. Then
press the SONG [START/STOP] button. Playback starts from the
beginning of the recorded data, and will stop automatically at the end of
the recorded data. You can also stop playback at any time by pressing
the SONG [START/STOP] button.
select the song for playback. The selected song indicator will light. (A
song is not selected if none of the indicators are lit.) Next, make sure
that the green track indicators of the tracks you want to play are lit. If
not, press the corresponding track button(s) so that they are lit. Then
press the SONG [START/STOP] button. Playback starts from the
beginning of the recorded data, and will stop automatically at the end of
the recorded data. You can also stop playback at any time by pressing
the SONG [START/STOP] button.
To mute a track so that it doesn’t play back, press the corresponding
track button so that its indicator goes out (press again to turn the track
back on).
back on).
The current measure number appears on the display during playback.
Press twice.
Playback