Yamaha P-120 Guía Del Usuario

 

P-120/P-120S

 

31

 

....................................................................

 

..................................................................

 

These functions make it possible to individually set the depth of the effect for the 1st and 

2nd dual-mode Voices (“1st” and “2nd” is explained on page 18). Use the 

 

▼

 

 and 

 

▲

 

 buttons to set the effect depth for the corresponding voice as required. The depth 

range is from 0 through 20. A setting of “0” produces no effect, while a setting of “20” pro-
duces maximum effect depth. Press the 

 

▼

 

 and 

 

▲

 

 buttons simultaneously to 

recall the default setting (different for each voice combination).

 

...............................................................................................

 

This function resets all dual-mode functions to their default values. Press the 

 

▲

 

 

button to reset the values. “End

 

” will appear on the display when all functions have been 

reset.

After selecting “F4.Y

 

”, press the 

 

▲

 

 button to engage the split-mode function sub-

mode, then use the 

 

▼

 

▲

 

 buttons to select the desired split mode 

function, as listed below. 

If the Split mode is not engaged “F4.-

 

” will appear instead of “F4.Y

 

” and the Split mode 

functions cannot be selected. Also note that you must exit from the Function mode before the 
Split mode can be engaged.

 

.......................................................................................

 

In addition to the split point setting method described on page 19, the split point can be set 

via this function. Use the 

 

▼

 

 and 

 

▲

 

 buttons to set the split point as required, or 

simply press the appropriate key on the keyboard: from “A-1

 

” to “C7

 

”. Press the 

 

▼

 

 

and 

 

▲

 

 buttons simultaneously to recall the default setting “F

 

#

 

2”.

 

..................................................................................

 

The volume levels of the two voices combined in the split mode can be adjusted as required 

by using this function. Use the 

 

▼

 

 and 

 

▲

 

 buttons to adjust the balance as 

required. The balance range is from 0 through 20. A setting of “10” produces equal balance 
between the two split-mode voices. Settings below “10” increase the volume of the Left Voice 
in relation to the Right Voice, and settings above “10” increase the volume of the Right Voice 
in relation to the Left Voice. Press the 

 

▼

 

 and 

 

▲

 

 buttons simultaneously to 

recall the default setting (different for each voice combination).

 

■

 

 

 

You can jump directly to the split-mode functions (F4) by pressing the 

 

 button while holding the 

 

 button.