Yamaha P-120 Guía Del Usuario

P-120/P-120S

34

F5.3: Soft Pedal Effect Depth .................................................................

This function sets the depth of the soft pedal effect. The effect depth range is from 1 to 5. A 

setting of “1” produces minimum effect depth while a setting of “5” produces maximum effect 
depth. Press the [–/NO

▼] and [+/YES▲] buttons simultaneously to recall the default setting 

of “3”.

F5.4: SUSTAIN PEDAL Type....................................................................

F5.5: AUX PEDAL Type............................................................................

Depending upon the pedal that is connected to the SUSTAIN PEDAL jack or AUX PEDAL 

jack, the effect produced by operating the pedal (ON/OFF, dynamics, etc.) might be reversed. 
If that is the case, use this setting to correct pedal operation. The setting range is from 1 to 2. 
Press the [–/NO

▼] and [+/YES▲] buttons simultaneously to recall the default setting of “1”.

The volume of the metronome sound can be changed. After selecting “F6”, use the 

▼] and [+/YES▲] buttons to set the metronome volume as required. The volume range 

is from 1 through 20. A setting of “1” produces minimum sound, while a setting of “20” pro-
duces maximum metronome volume. Press the [–/NO

▼] and [+/YES▲] buttons simulta-

neously to recall the default setting “10”.

This function sets the volume at which a “canceled” part is played during preset song play-

back (see page 17 for information on the “preset song part cancel” function). Use the 
[–/NO

▼] and [+/YES▲] buttons to set the volume as required. The volume range is from 0 

through 20. A setting of “0” produces no sound, while a setting of “20” produces maximum 
volume. Press the [–/NO

▼] and [+/YES▲] buttons simultaneously to recall the default setting 

“5”.

Adjust the part volume to a comfortable level to use the “canceled” part as a guide to play 

along with. Set to “0” if you don’t want to hear the part.

■ SHORTCUT: You can jump directly to the metronome functions by pressing the 

[TEMPO/FUNCTION#] button while holding the METRONOME [START/
STOP] button.