Yamaha P-120 Guía Del Usuario

P-120/P-120S

38

After selecting “F9.Y”, press the [+/YES

▲] button to engage the backup function sub-mode, then 

use the [TEMPO/FUNCTION# 

▼, ▲] buttons to select the desired backup function, as listed 

below. 

• Even if the Backup is turned on, factory presets can be recalled at any time (see page 44). The factory setting 

Even if backup is turned on via one of the functions described below, the data will only be retained 

in memory for about 1 week if the power is not turned on during this time. If the backup period is 
exceeded, all settings will be reset to their default values. If you want to retain the backup settings for 
longer periods, be sure to turn the power switch on for a few minutes at least once a week.

F9.1: Voice........................................................................................................

Turns backup of the voice functions listed below on or off. Use the [–/NO

▼] and [+/YES▲] but-

tons to turn backup “On” or “OFF”. 

The default backup mode is “OFF”.

• Voice (Keyboard, Dual, and Split)
• Dual (ON/OFF, Voice, and Dual Functions for each voice combination)
• Split (ON/OFF, Voice, and Split Functions for each voice combination)
• Reverb (ON/OFF, Type, and Depth for each voice)
• Effect (ON/OFF, Type, and Depth for each voice)
• Variation (for each voice)
• Touch Sensitivity (including the FIXED volume)
• Metronome (Beat, Volume)
• Preset Song Part Cancel Volume

F9.2: MIDI .........................................................................................................

Turns backup of the MIDI functions listed below on or off. Use the [–/NO

▼] and [+/YES▲] but-

tons to turn backup “On” or “OFF”. 

The default backup mode is “OFF”.

• Channel (Transmit, Receive)

• Local ON/OFF

• Program Change ON/OFF

• Control Change ON/OFF

• MIDI Transmit Transpose

F9.3: Tuning......................................................................................................

Turns backup of the tuning functions listed below on or off. Use the [–/NO

▼] and [+/YES▲] but-

tons to turn backup “On” or “OFF”. 

The default backup mode is “OFF”.

• Transpose

• Tuning

• Scale (including base note)

F9.4: Pedal .......................................................................................................

Turns backup of the pedal functions listed below on or off. Use the [–/NO

▼] and [+/YES▲] but-

tons to turn backup “On” or “OFF”. 

The default backup mode is “OFF”.

• AUX PEDAL Mode

• Sustain Sample Depth

• Soft Pedal Effect Depth

• SUSTAIN PEDAL Type

• AUX PEDAL Type