Yamaha yst-m10 Manual De Propietario

 

5

POWER

PRESENCE

VOLUME

1

2

3

SER NO.

＋

−

DC 14V

STEREO

INPUT

OUTPUT

to

4

5

6

INPUT

SER NO.

from

1

 

1

 

This should be connected to the OUTPUT 
connection on the right-channel cabinet using the 
supplied 3.5 mm stereo jack to jack cable. Do not 
connect anything else to this connection.

 

1

 

Press to power on the YST-M10s; the power 
indicate will light up. Press again to power off. 

Before powering on and off, turn down the 
VOLUME control.

 

2

 

This control allows frequency boost and cut of up 
to 

 

±

 

7 dB at 10  kHz. This tends to emphasize vocals, 

providing a warmer intimate sound. Turn it 
clockwise to boost, and counterclockwise to cut.

 

3

 

Use this control to set the volume level. Turn it 
clockwise to increase the volume, and 
counterclockwise to reduce it.

 

4

 

This is a 3.5 mm jack connection for inputting 
signals to the YST-M10s. If the equipment that you 
are using has 6.25 mm phone jacks, or phono/RCA 
type connections, use the appropriate supplied 
adaptor.

 

5

 

This should be connected to the INPUT connection 
on the left-channel cabinet using the supplied 3.5 
mm stereo jack to jack cable. Do not connect 
anything else to this connection.

 

6

 

Connect the supplied power supply adaptor to this 
connection.