Zonet zsr0104cp Manual De Usuario

 

 

 

 

Page

 

7

 

 

     

SERIES power adapter into the power outlet. 

 

Step 3.  It takes around 15 seconds to reset. The Power LED will turn on Green initially. Wait for 

it becomes Red then release the Reset button.   

 

Step 4.    Try to connect http://192.168.1.1/ via your Web browser. Use the user name “admin” and 

the password “admin ” to obtain authentication. If it is failed, please try the approach 

again. 

 

4. Power Connector 

Power connector connects your ZSR0104C SERIES to the power adapter. When ZSR0104C 

SERIES is connected to the correct power adapter and the power adapter is plugged into a power 

outlet, the Power LED will be on and ZSR0104C SERIES will boot and start operating.   

 

 

 

Use an Ethernet cable to connect your client PC to ZSR0104C SERIES local LAN port.   

 

   

    ZSR0104C SERIES supports auto-crossover, so you can use either a Straight-   

  Through cable or a Crossover cable to connect the client PC to the LAN port.   

If you have more than four clients, try to connect the hub or switch to ZSR0104C SERIES LAN 

port with an Ethernet cable, then connect each client PC to a hub or switch with an Ethernet cable, 

too.  

 

You can extend the wired LAN by connecting Wireless Access Point to ZSR0104C SERIES LAN 

port. Then a wireless network will be set up and it will turn into an infrastructure mode. The whole 

network coverage will be expanded by Access Point wireless connection to the wireless clients. 

Use the Ethernet cable to connect a Cable Modem or xDSL Box to ZSR0104C SERIES Internet