Zhone 2000 Guía Del Usuario
I n t r o d u c t i o n
9
WAN (T1 or DSL,
Depending on IAD
Model Number)
Connects through WAN interface as follows:
•
2216s/2224s
− T1/E1 (uses an RJ48 connector)
•
2316s/2324
− SDSL (uses an RJ11 connector)
•
2112s/8616s/2024s
− SHDSL (uses an RJ48 connector).
DCE V.35/RS-530
(USI)
When configured as an RS-530 port with a straight-through DB-25 serial
cable, connects to your leased-line DSU/CSU equipment. When configured
for use as V.35, Black Box Corporation provides a cable (FA058) for
conversion. To convert from RS-530 to RS-449, Black Box provides a cable
EDN57J. Contact Black Box for availability of and support for these cables.
cable, connects to your leased-line DSU/CSU equipment. When configured
for use as V.35, Black Box Corporation provides a cable (FA058) for
conversion. To convert from RS-530 to RS-449, Black Box provides a cable
EDN57J. Contact Black Box for availability of and support for these cables.
Battery Backup Connects a battery backup accessory (future feature).
Voice Lines Supports 12, 16, or 24 analog telephones via RJ21 connectors.
LIFE LINE Provides access to a telephone line when there is no power or voice gateway
to the IAD.
AC Power Input Connects the IAD to any AC 100-240 V outlet.
Data Interfaces The data connection through the IAD supports IEEE 802.1-compliant bridging
and routing. When the IAD is configured for routing, it supports RIP version
1, version 2, or static IP routing. The IAD complies with RFC 1812 when
interfacing with IPV4 routers. The IAD can terminate the following data
interfaces:
1, version 2, or static IP routing. The IAD complies with RFC 1812 when
interfacing with IPV4 routers. The IAD can terminate the following data
interfaces:
•
ATM data transport via SDSL, SHDSL, and T1/E1 per RFC 1483 or RFC
2364
•
Frame Relay data transport via SDSL and T1/E1 per RFC 1490
•
Frame Relay data transport per RFC 1483 with Q.922 frames