Zhone 6350-a4 Instruccion De Instalación
10
6350-A2-ZN12-30
Status LEDs
When power is applied, the ReachDSL modem performs self-diagnostics and the PWR LED is
on. The self-diagnostics include a power-on self-test during which all of the LEDs turn on for one
second.
on. The self-diagnostics include a power-on self-test during which all of the LEDs turn on for one
second.
All of the LEDs turn on and off during the power-on self-test. After a successful self-test, the
LEDs should appear as indicated in BOLD in the Condition column below.
LEDs should appear as indicated in BOLD in the Condition column below.
LED
Condition Status
PWR
ON
ReachDSL modem has power.
ALM
OFF
ON
ON
No active alarms.
An alarm condition exists.
An alarm condition exists.
TST
OFF
ON
ON
No active tests.
The TST LED is on during the power-on self-test and during a
The TST LED is on during the power-on self-test and during a
test initiated by the service provider.
LINE
ON
OFF
The DSL link is active and ready to transmit and receive data.
The DSL link has not been established.
The DSL link has not been established.
TX/RX
ON
OFF
OFF
Data transmission is in progress on the DSL line.
The modem is not transmitting or receiving data.
The modem is not transmitting or receiving data.
ETHERNET
ON
OFF
The Ethernet connection to the Ethernet hub or PC is active.
No Ethernet 10BaseT device is detected.
No Ethernet 10BaseT device is detected.
ReachDSL
TST
LINE
ETHERNET
ALM
PWR
TX/RX
01-17003
Power – green
Alarm – red
Test – yellow
Transmit/Receive – green
Ethernet Link – green
DSL Line – green