Zhone 6210 Instruccion De Instalación

INSTALL WHITE FERRITE CLAMP. If you 
plugged in a phone, install the supplied 
white ferrite clamp around both the LINE 
and PHONE cables. If you did not plug in a 
phone, install the white clamp around the 
LINE cable.  

Hold the open clamp around the cable or 
cables as close to the router as possible. 
Close the clamp and lock it by pressing on 
the latch.  

CONNECT TO PC OR ETHERNET HUB. Use an 8-pin Ethernet cable 
(straight-through or crossover) for the Ethernet connection. Insert one end of the 
cable into the jack labeled ETHERNET. 

Connect to one of the following:

—

PC. Use an Ethernet standard, 
straight-through cable and connect 
the other end to a PC with an 
Ethernet Network Interface Card 
(NIC) installed.

– or –

—

Ethernet Hub. Use an Ethernet 
standard, straight-through cable 
and connect the other end to an 
Ethernet hub’s Uplink port. (To 
connect to a hub’s standard port, 
use an Ethernet crossover cable. 
See the documentation that came 
with your hub.)

INSTALL BLACK FERRITE CLAMP. 
Hold the open clamp around the 
Ethernet cable as close to the router as 
possible. Close the clamp and lock it by 
pressing on the latch.

LINE

02-17359

PHONE

ETHERNET

PC with Ethernet

Network Interface

Card

Ethernet

Straight-Through

Cable

03-17360-01

ETHERNET

Ethernet

Straight-Through

Cable

Ethernet

Hub

8

7

6

5

4

3

2

1

02-17361-01