Zhone 7995 Guía Del Usuario
7990-A2-GB20-00
May 2002
2-1
2
Using the Asynchronous
Terminal Interface
Terminal Interface
User Interface Access
You can communicate with the Hotwire TDM SHDSL endpoint with an
asynchronous terminal interface (ATI) using one of the following methods:
asynchronous terminal interface (ATI) using one of the following methods:
Direct connection through the COM port of the endpoint or through the serial
port of the DSLAM management card.
port of the DSLAM management card.
Telnet session through the Embedded Operations Channel (EOC).
NOTE:
Only one terminal interface session can be active at a time, and another user’s
session cannot be forced to end.
session cannot be forced to end.
Security can limit ATI access several ways. To limit user access or set up login
IDs, refer to
IDs, refer to
.
Communication Port Settings
Ensure that the device you connect communicates using these settings:
Data rate set to 9.6 Kbps
Character length set to 8
Parity set to None
Stop Bits set to 1