ZyXEL 2WG Guía Del Usuario

 Chapter 6 LAN Screens

ZyWALL 2WG User’s Guide

This table allows you to assign IP addresses on the LAN to specific individual computers 
based on their MAC Addresses. 
To change your ZyWALL’s static DHCP settings, click NETWORK > LAN > Static DHCP. 
The screen appears as shown.

Allow between 

LAN and WAN1

Select this check box to forward NetBIOS packets from the LAN to WAN 1and from 

WAN 1 to the LAN. If your firewall is enabled with the default policy set to block 

WAN 1 to LAN traffic, you also need to enable the default WAN 1 to LAN firewall 

rule that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to WAN 1 

and from WAN 1 to the LAN.

Allow between 

LAN and WAN2

Select this check box to forward NetBIOS packets from the LAN to WAN 2 and 

from WAN 2 to the LAN. If your firewall is enabled with the default policy set to 

block WAN 2 to LAN traffic, you also need to enable the default WAN 2 to LAN 

firewall rule that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to WAN 2 

and from WAN 2 to the LAN.

Allow between 

LAN and DMZ

Select this check box to forward NetBIOS packets from the LAN to the DMZ and 

from the DMZ to the LAN. If your firewall is enabled with the default policy set to 

block DMZ to LAN traffic, you also need to enable the default DMZ to LAN firewall 

rule that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to the DMZ 

and from the DMZ to the LAN.

Allow between 

LAN and WLAN

Select this check box to forward NetBIOS packets from the LAN to the WLAN and 

from the WLAN to the LAN. 
Clear this check box to block all NetBIOS packets going from the LAN to the WLAN 

and from the WLAN to the LAN.

Apply

Click Apply to save your changes back to the ZyWALL.

Reset

Click Reset to begin configuring this screen afresh.

Table 23   NETWORK > LAN  (continued)