ZyXEL 2WG Guía Del Usuario

 Chapter 9 DMZ Screens

ZyWALL 2WG User’s Guide

Figure 127   NETWORK > DMZ 

The following table describes the labels in this screen. 

Table 46   NETWORK > DMZ

DMZ TCP/IP

IP Address

Type the IP address of your ZyWALL’s DMZ port in dotted decimal notation. 

Note: Make sure the IP addresses of the LAN, WAN, WLAN and 

DMZ are on separate subnets.

IP Subnet Mask

The subnet mask specifies the network number portion of an IP address. Your 

ZyWALL will automatically calculate the subnet mask based on the IP address 

that you assign. Unless you are implementing subnetting, use the subnet mask 

computed by the ZyWALL 255.255.255.0.

RIP Direction

RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to 

exchange routing information with other routers. The RIP Direction field controls 

the sending and receiving of RIP packets. Select the RIP direction from Both/In 

Only/Out Only/None. When set to Both or Out Only, the ZyWALL will broadcast 

its routing table periodically. When set to Both or In Only, it will incorporate the 

RIP information that it receives; when set to None, it will not send any RIP 

packets and will ignore any RIP packets received. Both is the default.