ZyXEL 2WG Guía Del Usuario

 Chapter 20 Policy Route Screens

ZyWALL 2WG User’s Guide

Gateway 

Select User-Defined and enter the IP address of the gateway if you want to 

specify the IP address of the gateway. The gateway is an immediate neighbor of 

your ZyWALL that will forward the packet to the destination. The gateway must be 

a router on the same segment as your ZyWALL's LAN or WAN interface.
Select WAN Interface to have the ZyWALL send traffic that matches the policy 

route through a specific WAN interface. Select the WAN interface from the drop-

down list box.
Select the Use another interface when the specified WAN interface is not 

available. check box to have the ZyWALL send traffic that matches the policy 

route through the other WAN interface if it cannot send the traffic through the WAN 

interface you selected. This option is only available when you select WAN 

Interface.

Converted Type 

of Service

Set the new TOS value of the outgoing packet. Prioritize incoming network traffic 

by choosing Don’t Change, Normal, Min Delay, Max Thruput, Max Reliable or 

Min Cost.

Converted 

Precedence

Set the new outgoing packet precedence value. Values are 0 to 7 or Don’t 

Change.

Log

Select Yes from the drop-down list box to make an entry in the system log when a 

policy is executed.

Apply

Click Apply to save your changes back to the ZyWALL.

Cancel

Click Cancel to exit this screen without saving.

Table 122   ADVANCED > POLICY ROUTE > Edit (continued)