ZyXEL 2WG Guía Del Usuario

 Chapter 28 Maintenance Screens

ZyWALL 2WG User’s Guide

Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a 
.bin extension, for example, "zywall.bin". The upload process uses HTTP (Hypertext Transfer 
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.  
See

 

 for upgrading firmware using FTP/TFTP commands.

Click MAINTENANCE > F/W UPLOAD. Follow the instructions in this screen to upload 
firmware to your ZyWALL. 

1

Only upload firmware for your specific model!

Figure 316   MAINTENANCE > Firmware Upload

The following table describes the labels in this screen.

1

Do not turn off the ZyWALL while firmware upload is in progress!

After you see the Firmware Upload in Process screen, wait two minutes before logging into 
the ZyWALL again. 

Table 188   MAINTENANCE > Firmware Upload

File Path 

Type in the location of the file you want to upload in this field or click Browse ... to find it.

Browse... 

Click Browse... to find the .bin file you want to upload. Remember that you must 

decompress compressed (.zip) files before you can upload them. 

Upload 

Click Upload to begin the upload process. This process may take up to two minutes.