ZyXEL 2WG Guía Del Usuario

 Chapter 29 Introducing the SMT

ZyWALL 2WG User’s Guide

Several operations that you should be familiar with before you attempt to modify the 
configuration are listed in the table below.

After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next. 

Table 191   Main Menu Commands

Move down 

to another 

menu

[ENTER]

To move forward to a submenu, type in the number of the desired 

submenu and press [ENTER].

Move up to a 

previous 

menu

[ESC]

Press the [ESC] key to move back to the previous menu.

Move to a 

“hidden” 

menu

Press  [SPACE 

BAR] to change 

No to Yes then 

press [ENTER].

Fields beginning with “Edit” lead to hidden menus and have a 

default setting of No. Press  [SPACE BAR] to change No to Yes, 

and then press [ENTER] to go to a “hidden” menu.

Move the 

cursor

[ENTER] or [UP]/

[DOWN] arrow 

keys

Within a menu, press [ENTER] to move to the next field. You can 

also use the [UP]/[DOWN] arrow keys to move to the previous and 

the next field, respectively.
When you are at the top of a menu, press the [UP] arrow key to 

move to the bottom of a menu.

Entering 

information

Fill in, or press 

[SPACE BAR], 

then press 

[ENTER] to select 

from choices.

You need to fill in two types of fields. The first requires you to type 

in the appropriate information. The second allows you to cycle 

through the available choices by pressing [SPACE BAR].

Required 

fields

<? >

All fields with the symbol <?> must be filled in order be able to 

save the new configuration.

N/A fields

<N/A>

Some of the fields in the SMT will show a <N/A>. This symbol 

refers to an option that is Not Applicable.

Save your 

configuration

[ENTER]

Save your configuration by pressing [ENTER] at the message 

“Press ENTER to confirm or ESC to cancel”. Saving the data on 

the screen will take you, in most cases to the previous menu.
Make sure you save your settings in each screen that you 

configure.

Exit the SMT

Type 99, then 

press [ENTER].

Type 99 at the main menu prompt and press [ENTER] to exit the 

SMT interface.