ZyXEL 2WG Guía Del Usuario

Descargar
Página de 780
 Chapter 44 Firmware and Configuration File Maintenance
ZyWALL 2WG User’s Guide
653
44.5.3  FTP File Upload Command from the DOS Prompt Example
Launch the FTP client on your computer.
Enter “open”, followed by a space and the IP address of your ZyWALL.  
Press [ENTER] when prompted for a username.
Enter your password as requested (the default is “1234”).
Enter “bin” to set transfer mode to binary.
Use “put” to transfer files from the computer to the ZyWALL, for example, “put 
firmware.bin ras” transfers the firmware on your computer (firmware.bin) to the 
ZyWALL and renames it “ras”. Similarly, “put config.rom rom-0” transfers the 
configuration file on your computer (config.rom) to the ZyWALL and renames it “rom-
0”. Likewise “get rom-0 config.rom” transfers the configuration file on the ZyWALL to 
your computer and renames it “config.rom.” See earlier in this chapter for more 
information on filename conventions.
Enter “quit” to exit the ftp prompt.
44.5.4  FTP Session Example of Firmware File Upload
Figure 442   FTP Session Example of Firmware File Upload
More commands (found in GUI-based FTP clients) are listed earlier in this chapter.
Refer to
to read about configurations that disallow TFTP and FTP 
over WAN.
44.5.5  TFTP File Upload
The ZyWALL also supports the uploading of firmware files using TFTP (Trivial File Transfer 
Protocol) over LAN. Although TFTP should work over WAN as well, it is not recommended.
To use TFTP, your computer must have both telnet and TFTP clients. To transfer the firmware 
and the configuration file, follow the procedure shown next.
Use telnet from your computer to connect to the ZyWALL and log in. Because TFTP 
does not have any security checks, the ZyWALL records the IP address of the telnet 
client and accepts TFTP requests only from this address.
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> put firmware.bin ras
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 1103936 bytes sent in 1.10Seconds 
297.89Kbytes/sec.
ftp> quit