ZyXEL 2WG Guía Del Usuario

 Chapter 3 Wizard Setup

ZyWALL 2WG User’s Guide

Use this screen to specify the authentication, encryption and other settings needed to negotiate 
a phase 1 IKE SA.

Starting IP 

Address

When the Local Network field is configured to Single, enter a (static) IP address on 

the LAN behind your ZyWALL. When the Local Network field is configured to Range 

IP, enter the beginning (static) IP address, in a range of computers on the LAN behind 

your ZyWALL. When the Local Network field is configured to Subnet, this is a 

(static) IP address on the LAN behind your ZyWALL.

Ending IP 

Address/

Subnet Mask

When the Local Network field is configured to Single, this field is N/A. When the 

Local Network field is configured to Range IP, enter the end (static) IP address, in a 

range of computers on the LAN behind your ZyWALL. When the Local Network field 

is configured to Subnet, this is a subnet mask on the LAN behind your ZyWALL.

Remote 

Network

Remote IP addresses must be static and correspond to the remote IPSec router's 

configured local IP addresses. 
Select Single for a single IP address. Select Range IP for a specific range of IP 

addresses. Select Subnet to specify IP addresses on a network by their subnet 

mask.

Starting IP 

Address

When the Remote Network field is configured to Single, enter a (static) IP address 

on the network behind the remote IPSec router. When the Remote Network field is 

configured to Range IP, enter the beginning (static) IP address, in a range of 

computers on the network behind the remote IPSec router. When the Remote 

Network field is configured to Subnet, enter a (static) IP address on the network 

behind the remote IPSec router

Ending IP 

Address/

Subnet Mask

When the Remote Network field is configured to Single, this field is N/A. When the 

Remote Network field is configured to Range IP, enter the end (static) IP address, in 

a range of computers on the network behind the remote IPSec router. When the 

Remote Network field is configured to Subnet, enter a subnet mask on the network 

behind the remote IPSec router.

Back

Click Back to return to the previous screen. 

Next

Click Next to continue. 

Table 17   VPN Wizard: Network Setting