ZyXEL p-660h-61 Guía Del Usuario
Prestige 660H Series User’s Guide
25-10 Remote
Node
Configuration
Move the cursor to the Edit Advance Options field, press [SPACE BAR] to select Yes, then press
[ENTER] to display Menu 11.8 – Advance Setup Options.
[ENTER] to display Menu 11.8 – Advance Setup Options.
Figure 25-10 Menu 11.8 Advance Setup Options
The following table describes the fields in this menu.
Table 25-3 Menu 11.8 Advance Setup Options
FIELD DESCRIPTION
PPPoE pass-through
Press [SPACE BAR] to select Yes and press [ENTER] to enable PPPoE pass through. In
addition to the Prestige's built-in PPPoE client, you can enable PPPoE pass through to
allow up to ten hosts on the LAN to use PPPoE client software on their computers to
connect to the ISP via the Prestige. Each host can have a separate account and a public
WAN IP address.
addition to the Prestige's built-in PPPoE client, you can enable PPPoE pass through to
allow up to ten hosts on the LAN to use PPPoE client software on their computers to
connect to the ISP via the Prestige. Each host can have a separate account and a public
WAN IP address.
PPPoE pass through is an alternative to NAT for applications where NAT is not
appropriate.
appropriate.
Press [SPACE BAR] to select No and press [ENTER] to disable PPPoE pass through if
you do not need to allow hosts on the LAN to use PPPoE client software on their
computers to connect to the ISP.
you do not need to allow hosts on the LAN to use PPPoE client software on their
computers to connect to the ISP.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel”
to save your configuration or press [ESC] to cancel and go back to the previous screen.
to save your configuration or press [ESC] to cancel and go back to the previous screen.
Menu 11.8 - Advance Setup Options
PPPoE pass-through= No
Press ENTER to Confirm or ESC to Cancel:
PPPoE pass-through= No
Press ENTER to Confirm or ESC to Cancel: