ZyXEL p-660h-61 Guía Del Usuario
Prestige 660H Series User’s Guide
Network Address Translation (NAT)
28-11
28.5.2 Example 2: Internet Access with an Inside Server
Figure 28-13 NAT Example 2
In this case, you do exactly as above (use the convenient pre-configured SUA Only set) and also go to
menu 15.2 to specify the Inside Server behind the NAT as shown in the next figure.
menu 15.2 to specify the Inside Server behind the NAT as shown in the next figure.
Figure 28-14 Menu 15.2.1 Specifying an Inside Server
28.5.3 Example 3: Multiple Public IP Addresses With Inside Servers
In this example, there are 3 IGAs from our ISP. There are many departments but two have their own
FTP server. All departments share the same router. The example will reserve one IGA for each
department with an FTP server and all departments use the other IGA. Map the FTP servers to the first
two IGAs and the other LAN traffic to the remaining IGA. Map the third IGA to an inside web server
and mail server. Four rules need to be configured, two bi-directional and two unidirectional as follows.
FTP server. All departments share the same router. The example will reserve one IGA for each
department with an FTP server and all departments use the other IGA. Map the FTP servers to the first
two IGAs and the other LAN traffic to the remaining IGA. Map the third IGA to an inside web server
and mail server. Four rules need to be configured, two bi-directional and two unidirectional as follows.
Map the first IGA to the first inside FTP server for FTP traffic in both directions (1 : 1 mapping,
giving both local and global IP addresses).
giving both local and global IP addresses).
Map the second IGA to our second inside FTP server for FTP traffic in both directions (1 : 1 mapping,
giving both local and global IP addresses).
giving both local and global IP addresses).
Menu 15.2.1 - NAT Server Setup (Used for SUA Only)
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 192.168.1.10
2. 0 0 0.0.0.0
3. 0 0 0.0.0.0
4. 0 0 0.0.0.0
5. 0 0 0.0.0.0
6. 0 0 0.0.0.0
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
11. 0 0 0.0.0.0
12. 0 0 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 192.168.1.10
2. 0 0 0.0.0.0
3. 0 0 0.0.0.0
4. 0 0 0.0.0.0
5. 0 0 0.0.0.0
6. 0 0 0.0.0.0
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
11. 0 0 0.0.0.0
12. 0 0 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: