ZyXEL p-660h-61 Guía Del Usuario
Prestige 660H Series User’s Guide
3-6
Wizard Setup
Table 3-2 Internet Connection with PPPoE
LABEL
DESCRIPTION
Service Name Type the name of your PPPoE service here.
User Name
Enter the user name exactly as your ISP assigned. If assigned a name in the form
where domain identifies a service name, then enter both components exactly as given.
Password
Enter the password associated with the user name above.
IP Address
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed; the
ISP assigns you a different one each time you connect to the Internet. The Single User Account
feature can be used with either a dynamic or static IP address.
ISP assigns you a different one each time you connect to the Internet. The Single User Account
feature can be used with either a dynamic or static IP address.
Select Obtain an IP Address Automatically if you have a dynamic IP address; otherwise select
Static IP Address and type your ISP assigned IP address in the IP Address text box below.
Static IP Address and type your ISP assigned IP address in the IP Address text box below.
Connection
Select Connect on Demand when you don't want the connection up all the time and specify an
idle time-out (in seconds) in the Max. Idle Timeout field. The default setting selects Connection
on Demand with 0 as the idle time-out, which means the Internet session will not timeout.
idle time-out (in seconds) in the Max. Idle Timeout field. The default setting selects Connection
on Demand with 0 as the idle time-out, which means the Internet session will not timeout.
Select Nailed-Up Connection when you want your connection up all the time. The Prestige will
try to bring up the connection automatically if it is disconnected.
The schedule rule(s) in SMT menu 26 has priority over your Connection settings.
try to bring up the connection automatically if it is disconnected.
The schedule rule(s) in SMT menu 26 has priority over your Connection settings.
Network
Address
Translation
Address
Translation
Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT chapter
for more details.
for more details.
Back
Click Back to go back to the first wizard screen.
Next
Click Next to continue to the next wizard screen.
Figure 3-3 Internet Connection with RFC 1483
The following table describes the fields in this screen.
Table 3-3 Internet Connection with RFC 1483
LABEL
DESCRIPTION
IP Address
This field is available if you select Routing in the Mode field.
Type your ISP assigned IP address in this field.