ZyXEL p-660h-61 Guía Del Usuario
Prestige 660H Series User’s Guide
Bridging Setup
27-3
Table 27-1 Remote Node Network Layer Options: Bridge Fields
FIELD DESCRIPTION
Bridge (menu 11.1)
Make sure this field is set to Yes.
Edit IP/Bridge (menu
11.1)
11.1)
Press [SPACE BAR] to select Yes and press [ENTER] to display menu 11.3.
Ethernet Addr Timeout
(min.) (menu 11.3)
(min.) (menu 11.3)
Type the time (in minutes) for the Prestige to retain the Ethernet Address information
in its internal tables while the line is down. If this information is retained, your
Prestige will not have to recompile the tables when the line comes back up.
in its internal tables while the line is down. If this information is retained, your
Prestige will not have to recompile the tables when the line comes back up.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel”
to save your configuration or press [ESC] to cancel and go back to the previous screen.
to save your configuration or press [ESC] to cancel and go back to the previous screen.
27.2.2 Bridge Static Route Setup
Similar to network layer static routes, a bridging static route tells the Prestige the route to a node
before a connection is established. You configure bridge static routes in menu 12.3.1 (go to menu 12,
choose option 3, then choose a static route to edit) as shown next.
before a connection is established. You configure bridge static routes in menu 12.3.1 (go to menu 12,
choose option 3, then choose a static route to edit) as shown next.
Figure 27-3 Menu 12.3.1 Edit Bridge Static Route
The following table describes the Edit Bridge Static Route menu.
Table 27-2 Menu 12.3.1 Edit Bridge Static Route
FIELD DESCRIPTION
Route #
This is the route index number you typed in Menu 12.3 – Bridge Static Route Setup.
Route Name
Type a name for the bridge static route for identification purposes.
Active
Indicates whether the static route is active (Yes) or not (No).
Ether Address
Type the MAC address of the destination computer that you want to bridge the packets
to.
to.
IP Address
If available, type the IP address of the destination computer that you want to bridge the
packets to.
packets to.
Gateway Node
Press [SPACE BAR] and then [ENTER] to select the number of the remote node (one to
eight) that is the gateway of this static route.
eight) that is the gateway of this static route.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
Menu 12.3.1 - Edit Bridge Static Route
Route #: 1
Route Name= ?
Active= No
Ether Address= ?
IP Address=
Gateway Node= 1
Press ENTER to Confirm or ESC to Cancel:
Route #: 1
Route Name= ?
Active= No
Ether Address= ?
IP Address=
Gateway Node= 1
Press ENTER to Confirm or ESC to Cancel: