ZyXEL p-660h-61 Guía Del Usuario
Prestige 660H Series User’s Guide
System Maintenance
35-5
Table 35-2 Menu 24.10 System Maintenance: Time and Date Setting
FIELD DESCRIPTION
Use Time Server
when Bootup
when Bootup
Enter the time service protocol that your time server sends when you turn on the
Prestige. Not all time servers support all protocols, so you may have to check with your
ISP/network administrator or use trial and error to find a protocol that works. The main
differences between them are the format.
Prestige. Not all time servers support all protocols, so you may have to check with your
ISP/network administrator or use trial and error to find a protocol that works. The main
differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of seconds
since 1970/1/1 at 0:0:0.
since 1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC-868).
None. The default, enter the time manually.
Time Server Address
Enter the IP address or domain name of your time server. Check with your ISP/network
administrator if you are unsure of this information.
administrator if you are unsure of this information.
Current Time
This field displays an updated time only when you reenter this menu.
New Time
Enter the new time in hour, minute and second format.
Current Date
This field displays an updated date only when you re-enter this menu.
New Date
Enter the new date in year, month and day format.
Time Zone
Press [SPACE BAR] and then [ENTER] to set the time difference between your time
zone and Greenwich Mean Time (GMT).
zone and Greenwich Mean Time (GMT).
Daylight Saving
If you use daylight savings time, then choose Yes.
Start Date
If using daylight savings time, enter the month and day that it starts on.
End Date
If using daylight savings time, enter the month and day that it ends on
Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to Cancel“ to
save your configuration, or press [ESC] to cancel.
save your configuration, or press [ESC] to cancel.
35.3.1 Resetting the Time
The Prestige resets the time in three instances:
♦
On leaving menu 24.10 after making changes.
♦
When the Prestige starts up, if there is a timeserver configured in menu 24.10.
♦
24-hour intervals after starting.