ZyXEL NSA-2400 Guía Del Usuario

Chapter 5 Network Screens

NSA-2400 User’s Guide

Use this screen to configure your CIFS settings. In this screen you can set your server name, 
your WINS server, and specify if your NSA is a part of a workgroup or domain.

"

CIFS cannot be disabled on the NSA.

"

The NSA automatically restarts after you apply changes in the TCP/IP or 
Windows/CIFS screens.

A workgroup is a group of computers on a network that can share files. On the NSA, use 
Workgroup Security Mode if the user names and passwords for these computers are 
maintained on the NSA. This is suitable for users using the Common Internet File System 
(CIFS) protocol for remote file access in a small-to-medium sized office. 

Static

Select the checkbox to choose a static DNS server address. Type the DNS 
server IP address(es) into the fields below.

Primary DNS 
Server

Type a primary DNS server IP address.

Secondary 
DNS Server

Type a secondary DNS server IP address.

Jumbo Frame

Jumbo frames improve network performance. You must have a 1 Gbps (Gigabit 
Ethernet) network that supports jumbo frames. Select the largest size of frame 
that all of your network devices (including computer Ethernet cards and switches, 
hubs, or routers) support.

Note: If you enable jumbo frames on the NSA-2400 in a network 

that does not support them, you will lose access to the NSA-
2400. If this occurs, you will have to restore the factory 
default configuration.

Apply

Click Apply to save your TCP/IP configurations. After you click Apply, the NSA 
restarts. Wait until you see the Login screen or until the NSA fully boots and then 
use the NDU to rediscover it.

Table 24   Network > TCP/IP