ZyXEL nbg-4615 Guía Del Usuario
Chapter 14 Wireless LAN
NBG4615 User’s Guide
138
14.3.3 WPA-PSK/WPA2-PSK
Select WPA-PSK or WPA2-PSK from the Security Mode list.
Figure 78 Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Hex
Select this option in order to enter hexadecimal characters as a WEP key.
The preceding "0x", that identifies a hexadecimal key, is entered
automatically.
automatically.
Key 1 to Key 4 The WEP keys are used to encrypt data. Both the NBG4615 and the
wireless stations must use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10
hexadecimal characters ("0-9", "A-F").
hexadecimal characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26
hexadecimal characters ("0-9", "A-F").
hexadecimal characters ("0-9", "A-F").
You must configure at least one key, only one key can be activated at
any one time. The default key is key 1.
any one time. The default key is key 1.
Apply
Click Apply to save your changes back to the NBG4615.
Cancel
Click Cancel to reload the previous configuration for this screen.
Table 44 Network > Wireless LAN > Security: Static WEP (continued)
LABEL
DESCRIPTION
Table 45 Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK
LABEL
DESCRIPTION
SSID
Select the SSID for which you want to configure the security.
Security Mode
Select WPA-PSK or WPA2-PSK to enable data encryption.
WPA
Compatible
Compatible
This field appears when you choose WPA2-PSK as the Security Mode.
Check this field to allow wireless devices using WPA-PSK security
mode to connect to your NBG4615.
mode to connect to your NBG4615.