DELL 3000 Manuales De Servicio
Removing and Replacing Parts
4-37
L
CD Assembly
The LCD assembly consists of the display assembly and its related components.
This section describes how to remove either the 12.1-inch or 13.3-inch LCD
assembly. Later sections in this chapter provide removal and replacement proce-
dures for the components of the LCD assembly.
This section describes how to remove either the 12.1-inch or 13.3-inch LCD
assembly. Later sections in this chapter provide removal and replacement proce-
dures for the components of the LCD assembly.
Figure 4-23. LCD Assembly Removal
To remove the LCD assembly, follow these steps:
1. Remove the hinge covers and the connector cover.
See “Keyboard” found earlier in this chapter.
2. Remove the status display panel.
3. Disconnect the inverter cable.
The inverter cable is a cable harness on the right side of the LCD assembly.
LCD assembly
hinge covers (2)
H1
H2
H3
H4
connector cover
(screws H1–H4
are 8 mm)
are 8 mm)
inverter cable
LCD flex cable
G1
G2
(screws G1 and
G2 are 5 mm)
G2 are 5 mm)
NOTE: This is a figure of a 12.1-inch LCD assembly. The 13.3-inch LCD
assembly has an LCD wiring harness instead of an LCD flex cable.
assembly has an LCD wiring harness instead of an LCD flex cable.
connectors JP8 or JP1
status display panel
8 mm
5 mm