ZyXEL p-330w Guía Del Usuario

ZyXEL P-330W User’s Guide

43 

Chapter 4 System Screens

Figure 16   LAN IP Setup

The following table describes the labels in this screen.

Table 14   LAN IP Setup

IP Address

Type the IP address of your P-330W in dotted decimal notation 192.168.10.1 

(factory default).

IP Subnet Mask

The subnet mask specifies the network number portion of an IP address. Your P-

330W will automatically calculate the subnet mask based on the IP address that 

you assign. Unless you are implementing subnetting, use the subnet mask 

computed by the P-330W 255.255.255.0.

DHCP

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows 

individual clients (computers) to obtain TCP/IP configuration at startup from a 

server.  Choose Server  box selected unless your ISP instructs you to do 

otherwise. Choose Disabled the P-330W acting as a DHCP server. When 

configured as a server, the P-330W provides TCP/IP configuration for the clients. 

If not, DHCP service is disabled and you must have another DHCP server on 

your LAN, or else the computers must be manually configured. When set as a 

server, fill in the following four fields.

DHCP Client Range This field specifies the contiguous addresses in the IP address pool.

Show DHCP Client

Push this button opens a new window which will show you a list of the clients that 

have recieved an IP address from the internal DHCP server.

MAC Address

Type the MAC address of computer which you want to assign specific IP on you 

LAN.

Lease IP Address

Type the IP address that you want to assign the computer on your LAN.

Save

Click Apply to save your changes back to the P-330W.

Reset

Click Reset to begin configuring this screen afresh.