ZyXEL p-330w Guía Del Usuario
ZyXEL P-330W User’s Guide
53
Chapter 5 Wireless
5.5 Site Survey
Click Site Survey to scan the wireless network. If any Access Point or IBSS is found, you
could choose to connect it when P330’s wireless mode is set to Client mode.
could choose to connect it when P330’s wireless mode is set to Client mode.
Figure 27 Wireless: Site Survey
5.6 Wireless Security Overview
Wireless security is vital to your network to protect wireless communication between wireless
stations, access points and the wired network.
stations, access points and the wired network.
The figure below shows the possible wireless security levels. EAP (Extensible Authentication
Protocol) is used for authentication and utilizes dynamic WEP key exchange. It requires
interaction with a RADIUS (Remote Authentication Dial-In User Service) server either on the
WAN or your LAN to provide authentication service for wireless stations.
Protocol) is used for authentication and utilizes dynamic WEP key exchange. It requires
interaction with a RADIUS (Remote Authentication Dial-In User Service) server either on the
WAN or your LAN to provide authentication service for wireless stations.
Broadcast SSID Select this to hide the SSID in the outgoing beacon frame so a station cannot obtain
the SSID through passive scanning using a site survey tool.
IAPP
Used in a multiple AP environment where 802.1x is used for authentication.
Save
Click Save to save your changes back to the P-330W.
Reset
Click Reset to reload the previous configuration for this screen.
Table 18 Wireless: Advanced Settings
LABEL
DESCRIPTION