ZyXEL nbg-334w Guía Del Usuario

 Chapter 8 LAN

NBG334W User’s Guide

Figure 55   Any IP Example

The Any IP feature does not apply to a computer using either a dynamic IP address or a static 
IP address that is in the same subnet as the NBG334W’s IP address.

"

You must enable NAT to use the Any IP feature on the NBG334W. 

Address Resolution Protocol (ARP) is a protocol for mapping an Internet Protocol address (IP 
address) to a physical machine address, also known as a Media Access Control or MAC 
address, on the local area network. IP routing table is defined on IP Ethernet devices (the 
NBG334W) to decide which hop to use,

 

to help forward data along to its specified destination.

The following lists out the steps taken, when a computer tries to access the Internet for the first 
time through the NBG334W.

1 When a computer (which is in a different subnet) first attempts to access the Internet, it 

sends packets to its default gateway (which is not the NBG334W) by looking at the 
MAC address in its ARP table. 

2 When the computer cannot locate the default gateway, an ARP request is broadcast on 

the LAN. 

3 The NBG334W receives the ARP request and replies to the computer with its own MAC 

address. 

4 The computer updates the MAC address for the default gateway to the ARP table. Once 

the ARP table is updated, the computer is able to access the Internet through the 
NBG334W. 

5 When the NBG334W receives packets from the computer, it creates an entry in the IP 

routing table so it can properly forward packets intended for the computer. 

After all the routing information is updated, the computer can access the NBG334W and the 
Internet as if it is in the same subnet as the NBG334W.