ZyXEL nbg-334w Guía Del Usuario

 Chapter 4 AP Mode

NBG334W User’s Guide

The following table describes the labels shown in the Status screen.

Table 22   Web Configurator Status Screen

Device Information

System Name

This is the System Name you enter in the Maintenance > System > General 

screen. It is for identification purposes.

Firmware Version

This is the firmware version and the date created. 

LAN Information

- MAC Address

This shows the LAN Ethernet adapter MAC Address of your device.

- IP Address

This shows the LAN port’s IP address.

- IP Subnet Mask

This shows the LAN port’s subnet mask.

- DHCP

This shows the LAN port’s DHCP role - Client or None.

WLAN Information

- MAC Address

This shows the wireless adapter MAC Address of your device.

- Name (SSID)

This shows a descriptive name used to identify the NBG334W in the wireless LAN. 

- Channel

This shows the channel number which you select manually.

- Operating Channel

This shows the channel number which the NBG334W is currently using over the 

wireless LAN. 

- Security Mode

This shows the level of wireless security the NBG334W is using.

- 802.11 Mode

This shows the IEEE 802.11 standard that the NBG334W supports. Wireless clients 

must support the same standard in order to be able to connect to the NBG334W

System Status

System Uptime

This is the total time the NBG334W has been on.

Current Date/Time

This field displays your NBG334W’s present

 

date and time.

System Resource

- CPU Usage

This displays what percentage of the NBG334W’s processing ability is currently 

used. When this percentage is close to 100%, the NBG334W is running at full load, 

and the throughput is not going to improve anymore. If you want some applications to 

have more throughput, you should turn off other applications (for example, using 

bandwidth management.

- Memory Usage

This shows what percentage of the heap memory the NBG334W is using. Heap 

memory refers to the memory that is not used by ZyNOS (ZyXEL Network Operating 

System) and is thus available for running processes like NAT and the firewall. 

System Setting

- Configuration Mode

This shows whether the advanced screens of each feature are turned on 

(Advanced) or not (Basic).

- System Operation Mode This shows whether the system is configured to connect to the Internet in Router 

Mode or Access Point Mode.

Interface Status

Interface

This displays the NBG334W port types. The port types are: LAN and WLAN.

Status

For the LAN port, this field displays Down (line is down) or Up (line is up or 

connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN 

is disabled.