ZyXEL nbg-334w Guía Del Usuario
Chapter 5 Wireless LAN
NBG334W User’s Guide
81
The following table describes the labels in this screen.
Table 31 Network > Wireless LAN > General: WPA/WPA2
LABEL
DESCRIPTION
WPA Compatible
This check box is available only when you select WPA2-PSK or WPA2 in the
Security Mode field.
Select the check box to have both WPA2 and WPA wireless clients be able to
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the NBG334W even when the NBG334W is using WPA2-PSK
or WPA2.
ReAuthentication
Timer (in seconds)
Specify how often wireless stations have to resend usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds.
The default time interval is 1800 seconds (30 minutes).
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server
has priority.
has priority.
Idle Timeout
The NBG334W automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the
username and password again before access to the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
Group Key Update
Timer
The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/
WPA2-PSK key management) or RADIUS server (if using WPA/WPA2 key
management) sends a new group key out to all clients. The re-keying process is
the WPA/WPA2 equivalent of automatically changing the WEP key for an AP
and all stations in a WLAN on a periodic basis. Setting of the Group Key Update
Timer is also supported in WPA-PSK/WPA2-PSK mode. The NBG334W default
is 1800 seconds (30 minutes).
Authentication Server
IP Address
Enter the IP address of the external authentication server in dotted decimal
notation.
Port Number
Enter the port number of the external authentication server. The default port
number is 1812.
You need not change this value unless your network administrator instructs you
You need not change this value unless your network administrator instructs you
to do so with additional information.
Shared Secret
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the NBG334W.
The key must be the same on the external authentication server and your
The key must be the same on the external authentication server and your
NBG334W. The key is not sent over the network.
Accounting Server
Active
Select Yes from the drop down list box to enable user accounting through an
external authentication server.
IP Address
Enter the IP address of the external accounting server in dotted decimal notation.
Port Number
Enter the port number of the external accounting server. The default port number
is 1813.
You need not change this value unless your network administrator instructs you
You need not change this value unless your network administrator instructs you
to do so with additional information.
Shared Secret
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external accounting server and the NBG334W.
The key must be the same on the external accounting server and your
The key must be the same on the external accounting server and your
NBG334W. The key is not sent over the network.
Apply
Click Apply to save your changes back to the NBG334W.
Reset
Click Reset to reload the previous configuration for this screen.