ZyXEL p-660hwp Manual De Usuario

 Appendix G Firewall Commands

P-660HWP-Dx User’s Guide

config edit firewall set <set 
#> rule <rule #> destaddr-
single <ip address>

This command sets the rule to have the P-

660HWP-Dx check for traffic with this 

individual destination address.

config edit firewall set <set 
#> rule <rule #> destaddr-
subnet <ip address> <subnet 
mask>

This command sets a rule to have the P-

660HWP-Dx check for traffic with a particular 

subnet destination (defined by IP address and 

subnet mask).

config edit firewall set <set 
#> rule <rule #> destaddr-
range <start ip address> <end 
ip address>

This command sets a rule to have the P-

660HWP-Dx check for traffic going to this 

range of addresses.

config edit firewall set <set 
#> rule <rule #> TCP destport-
single <port #>

This command sets a rule to have the P-

660HWP-Dx check for TCP traffic with this 

destination address. You may repeat this 

command to enter various, non-consecutive 

port numbers. 

config edit firewall set <set 
#> rule <rule #> TCP destport-
range <start port #> <end port 
#>

This command sets a rule to have the P-

660HWP-Dx check for TCP traffic with a 

destination port in this range.

config edit firewall set <set 
#> rule <rule #> UDP destport-
single <port #>

This command sets a rule to have the P-

660HWP-Dx check for UDP traffic with this 

destination address. You may repeat this 

command to enter various, non-consecutive 

port numbers.

config edit firewall set <set 
#> rule <rule #> UDP destport-
range <start port #> <end port 
#>

This command sets a rule to have the P-

660HWP-Dx check for UDP traffic with a 

destination port in this range.

Delete

config delete firewall e-mail

This command removes all of the settings for 

e-mail alert.

config delete firewall attack

This command resets all of the attack 

response settings to their defaults.

config delete firewall set 
<set #>

This command removes the specified set 

from the firewall configuration.

Table 168   Firewall Commands (continued)