ZyXEL 793H Guía Del Usuario

Chapter 21 Introducing the SMT

P-793H User’s Guide

Figure 139   SMT Main Menu

"

There is an inactivity timeout, and the default value is ten minutes. If there is 
no activity for longer than this, your ZyXEL Device will automatically log you 
out. You will then have to telnet into the ZyXEL Device again. You can use the 
web configurator or the CI commands (menu 24.8) to change the inactivity 
timeout period.

The following table provides an overview of each menu item.

                    Copyright (c) 1994 - 2006 ZyXEL Communications Corp.

                              P-793H Main Menu

     Getting Started                      Advanced Management
       1. General Setup                     21. Filter and Firewall Setup
       2. WAN Setup                         22. SNMP Configuration
       3. LAN Setup                         23. System Password
       4. Internet Access Setup             24. System Maintenance
                                            25. IP Routing Policy Setup
     Advanced Applications                  26. Schedule Setup
       11. Remote Node Setup
       12. Static Routing Setup
       15. NAT Setup                        99. Exit

                          Enter Menu Selection Number:

Table 89   Main Menu Summary

1 General Setup

Use this menu to set up device mode, dynamic DNS and administrative 

information.

2 WAN Setup

Use this menu to configure the DSL connection, traffic redirect, and dial-

backup interface.

3 LAN Setup

Use this to apply LAN filters, configure LAN DHCP and TCP/IP settings, 

and to allow or block layer-2 traffic between each pair of ports.

4 Internet Access Setup

Use this menu to configure your Internet connection.

11 Remote Node Setup

Use this menu to configure detailed remote node settings (for example, 

your ISP is a remote node) as well as apply filters.

12 Static Routing Setup

Use this menu to configure IP and bridge (MAC) static routes.