ZyXEL 793H Guía Del Usuario

 Chapter 33 System Information & Diagnosis

P-793H User’s Guide

This section describes your system and allows you to choose different console port speeds. To 
get to the System Information and Console Port Speed:

1 Enter 24 to go to Menu 24 - System Maintenance. 
2 Enter 2 to open Menu 24.2 - System Information and Console Port Speed. 
3 From this menu you have two choices as shown in the next figure:

Figure 204   Menu 24.2: System Information and Console Port Speed

System Information gives you information about your system as shown below. More 
specifically, it gives you information on your routing protocol, Ethernet address, IP address, 
etc.

WAN

This section displays information about the WAN port.

Note: In a point-to-2points connection this field only displays line 1 

status.

Line Status

This field displays the port speed and duplex setting if you’re using Ethernet 

encapsulation and Down (line is down or not connected), Idle (line (ppp) idle), 

Dial (starting to trigger a call) or Drop (dropping a call) if you’re using PPPoE 

encapsulation.

Transfer Rate

This field shows the transmission speed in kilobits per second on this port.

CPU Load

This field displays the percentage of CPU utilization.

You may enter 1 to reset the counters or [ESC] to return to menu 24.

Table 120   Menu 24.1: System Maintenance - Status (continued)

              Menu 24.2 - System Information and Console Port Speed

                    1. System Information
                    2. Console Port Speed