ZyXEL 793H Guía Del Usuario

 Chapter 36 IP Routing Policy Setup

P-793H User’s Guide

If a network has both Internet and remote node connections, you can route Web packets to the 
Internet using one policy and route FTP packets to a remote network using another policy. See 
the next figure. 
Route 1 represents the default IP route and route 2 represents the configured IP route.

Figure 240   IP Routing Policy Example 

To force Web packets coming from clients with IP addresses of 192.168.1.33 to 192.168.1.64 
to be routed to the Internet via the WAN port of the ZyWALL, follow the steps as shown next.

1 Create a rule in Menu 25.1 - IP Routing Policy Setup as shown next.

Action

Specifies whether action should be taken on criteria Matched or Not Matched.

Gateway addr

Enter the IP address of the gateway to which the ZyXEL Device forwards the 

packet. The gateway is an immediate neighbor of your ZyXEL Device and 

must be on the same subnet as the ZyXEL Device, if it is on the LAN, or the IP 

address of a remote node, if it is on the WAN. Enter 0.0.0.0 to specify the 

default gateway.

Type of Service

Set the new TOS value of the outgoing packet. Prioritize incoming network 

traffic by choosing No Change, Normal, Min Delay, Max Thruput, Max 

Reliable or Min Cost.

Precedence

Set the new outgoing packet precedence value. Values are 0 to 7 or Don't 

Care.

Log

Press [SPACE BAR] and then [ENTER] to select Yes to make an entry in the 

system log when a policy is executed.

Table 132   Menu 25.1.1: IP Routing Policy (continued)